Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

American Standard G60-8

jmill
jmill Member Posts: 3
in THE MAIN WALL
Would anyone out there be able to tell me the heating capacity of an American Standard G60-8 water boiler?

Comments

  • unclejohn
    unclejohn Member Posts: 1,833
    I'll Guess

    60.000
  • Ironman
    Ironman Member Posts: 7,634
    unless...

    The "8" stands for eight sections?
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • The Steam Whisperer (Formerly Boilerpro)
    The Steam Whisperer (Formerly Boilerpro) Member Posts: 834
    I think it does

    If its the boiler I'm thinking of (had one in my old house) with atmospheric burners, that would be 240,000 input (30,000 btu input per section).  They were quite efficient.....about the same as most atmospherics today.

    There was an error rendering this rich post.

This discussion has been closed.

Categories