Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
one pipe two connections to radiator
jumper
Member Posts: 2,389
On this site is a picture of a Wilson fitting.
I think that I remember a building in which radiators were connected this way.
One pipe from floor went up beside radiator to connect at both top & bottom.
Is my memory incorrect ? Could you eliminate the rad vent this way ?
I think that I remember a building in which radiators were connected this way.
One pipe from floor went up beside radiator to connect at both top & bottom.
Is my memory incorrect ? Could you eliminate the rad vent this way ?
0
Comments
-
no, you would still need the vent
as the air in the radiator still has to be able to escape to atmosphere..gwgillplumbingandheating.com
Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.0
This discussion has been closed.
Categories
- All Categories
- 86.4K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 50 Biomass
- 419 Carbon Monoxide Awareness
- 91 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 93 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 59 Pipe Deterioration
- 920 Plumbing
- 6.1K Radiant Heating
- 374 Solar
- 15K Strictly Steam
- 3.3K Thermostats and Controls
- 50 Water Quality
- 40 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements