Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
union elbow
TedE
Member Posts: 3
I have 100 year old cast iron radiators. A 1" elbow on one of them has cracked. It appears to be a combination of a union and an elbow. Is this type of elbow still available and where might I look for one?
0
Comments
-
It depends...
on what is in the elbow! Some vapour systems had various devices -- little balls, orifices, multiple orifices, etc. in there -- so one would need to know just what it was one was replacing.
This question, though, might get more responses under "strictly steam"...Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
There's nothing
in the elbow. It's just a 90 degree turn in the pipe from the radiator going down through the floor. I took your advice and posted this on Strictly steam also. Thanks.0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 95 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 889 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements