EASB Air Vent Float

BrianCNY

Hello



I have a B&G EASB-JR air scoop (like a spirovent).



I took the cap off on the top to check for debris (there was)

and the float was stuck. I had to turn the cap to get it off,

yet the float was not turning. So, the linkage is bent, but

not broke.



I have no idea how this is supposed to look or be adjusted.

The B&G site and Google have nothing. I have the install

instructions for it and there is not an internal diagram.



Does anyone know how the linkage should be?



Thanks so much . . . . Brian