Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vitodens 200 Lambda Pro
SpeyFitter
Member Posts: 422
Can anyone in here offer me a comparison of how Lambda Pro compares against say an automotive style combustion system with a mass airflow meter and an O2 sensor say? I know the Lambda pro system reacts to flame current everytime it first fires up and does a calibration and then uses that to base how it modulates the gas valve to alter air-fuel ratios for a desired effect, however would an O2 sensing system fair as well, better, or worse, in your opinion?
There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements