Excellent Gas Training Course

Tim McElwain

starting In January 2011.



<strong>GAS TRAINING INSTITUTE</strong>



<strong>338 Metacom Ave.</strong> Warren, Rhode Island Is

offering

 



<strong>A Gas Technology Training </strong>

<strong>Course </strong>



<strong>of 240 hours starting in January </strong>

<strong>2011. </strong>



<strong>This will satisfy the licensing</strong>

<strong>education requirement for the </strong>

<strong>State of Rhode Island for the </strong>

<strong>Natural Gas and LP limited </strong>

<strong>licenses. </strong>

<strong> </strong>

GTI is certified and approved as a training facility for these gas licenses in Rhode Island.

 



<strong>The course uses the International </strong>

<strong>Fuel Gas Code/NFPA 54 National</strong>

<strong>Fuel Gas Code and </strong>



<strong>Massachusetts Gas Fitters Code </strong>

<strong>248 CMR.</strong>

<strong> </strong>





The instructor Tim McElwain and industry educator has over 40 years



experience in the gas industry. He is also a code expert, controls expert and is

able to teach a practical application hands on type of training much needed in

our industry today.

 





Inquiry may be made by calling 401-437-0557 or

e-mail at gastc@cox.net.



Mail inquiry at:

 

Gas Appliance Service Training and Consulting



22 Griffith Drive



Riverside, RI 02915

 



There is also some limited job placement available.

 

<strong> </strong>

<strong>GAS TECHNOLOGY TRAINING </strong>



<strong>COURSE</strong>

<strong> </strong>



<strong>Will be offered starting January</strong>

<strong>2011</strong>

<strong> </strong>



AT

 



Gas Training Institute



338 Metacom Ave.



Warren, Rhode Island



 Phase I Fundamentals of 

Gas Service                    160 hours





 Phase II House Heating                  80 hours

 



<strong>This is a total of 240 hours, which </strong>

<strong>will satisfy the licensing education </strong>

<strong>requirement for the State of Rhode </strong>

<strong>Island for the Natural gas and LP </strong>

<strong>limited licenses..</strong>

<strong> </strong>



There is an additional 120 hours available in Phase III Conversion



Burners/Combustion testing   40 hours





Phase IV Electric Ignition Systems     40 hours





Phase V   Advanced Electric Ignition Systems      40 Hours

 



This is a total of 360 hours for the entire course.

 



The Gas Training Institute is a certified and approved training facility for the

State of Rhode Island





This course is also for non Rhode Island techs who are looking for a very

comprehensive course on Gas Heating.

 



For further information and pricing contact



 

Tim McElwain



Gas Appliance Service Training and Consulting



22 Griffith Drive



Riverside, RI 02915



Or call 401-427-0557  



FAX 401-270-1893





E-mail <a href="mailto:gastc@cox.net">gastc@cox.net</a>