Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
efficency test
tonytbone
Member Posts: 1
Please give me a perfect listof numbers(stack temp=375'..and so on) for an efficency test so I can print it and give it to my service tech.
0
Comments
-
that would depend......
On a lot.... Gas OR oil, the boiler, the chimney or vent. Those numbers should be w/ the Boiler/ appliance and are a guideline for a range to in.0 -
What is perfect?
are you looking for stoichemetric figures? Is it oil or gas as already asked as they have different numbers.
Has your tech had combustion training and are they using a wet kit or electronic?0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements