Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

B&G

Jim Pompetti
Jim Pompetti Member Posts: 552
in THE MAIN WALL
Is B&G having problems with there Series 60 pumps Had a new pump today not turn . Played with it  for a while the  only,way it  work, was to loosen the bolts till it leaked . I slowly tighten the bolts leak stopped ,so did the motor. Tried everything ,now have to do it all over Monday. The salesman will give me a new pump , I asked him if he was working today for free , because I did . 

Comments

  • Ironman
    Ironman Member Posts: 7,441
    We Quit...

    Stopped using B&G pumps for the same reason - defective out of the box. Look at the tag: they are made in China. Grunfos or Taco are much better.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Nick Ciasullo
    Nick Ciasullo Member Posts: 44
    Incorrect

    The Series 60 IS NOT made in China.  Look at the box again.  The ENTIRE line of Bell & Gossett pumps are made here with the exception of the wet rotor pump (NRF Series - China) and the stainless 3530 pressure booster (Italy).

    Jim, you could have called me.

    Nick Ciasullo

    REP for ITT B&G
This discussion has been closed.

Categories