Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
service
RichG_Beverly2
Member Posts: 1
I went to the Reznor web site looking for wiring diagrams for Mod # RPBL600-8-S-MU controlled from a Selectra Maxitrol controller. After two attempts I received error messages. Does anyone know where I may find this info? Also, this was the first time that I looked at this MAU and at some point the cooling was disconnected from the Maxitrol. The two stage cond unit was being controlled from a two stage Ranco electronic temperature controller located in the blower compartment. I wonder what happens in the heating mode. I assume that the Maxitrol is defective.
0
Comments
-
Try the Reznor site again
as I was able to reach a PDF file on the RPB series with no problem at all.
[url=http://www.rezspec.com/index.php?pageid=0000000000148mod_files[currpos]=000000000002]www.rezspec.com/index.php?pageid=0000000000148mod_files[currpos]=0000000000020
This discussion has been closed.
Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 113 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements