Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
President
Plach
Member Posts: 2
in Gas Heating
Bonjour
is it possible to have a table or diagram of flue gas temperature and heat available of using CH4 (methane). My real question is; what is the condensation point temperature for CH4 flu gases
Thanks in advance
Patrick Lach
is it possible to have a table or diagram of flue gas temperature and heat available of using CH4 (methane). My real question is; what is the condensation point temperature for CH4 flu gases
Thanks in advance
Patrick Lach
0
Comments
-
Biogas
My question was the ch4 on Bio gas
thanks0 -
Are you asking concerning
pure CH4 (methane) or a natural gas mix?
For natural gas the answer would depend on the excess air, CO2 in the flue gas analysis. Not sure that is what you are asking?0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements