Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Power Flame Dual Burner
Sly
Member Posts: 29
in Gas Heating
i have a powerflame dual burner. i currently only use oil. I wanted to add a gas line to this burner and have the ability to switch back and forth. Does anyone use a dual burner on their property. I wanted to know how feasible it is.
thanks
sil
thanks
sil
0
Comments
-
power flame
I worked at a large skilled nursing facility that had 3 power flame dual fuel burners. they were decent,and I did not run them much on no 2 oil,but I never had many problems with them.overall,a good experience0 -
burners
0 -
I have several that
I take care of that are switched back and forth based on pricing over the past few years, they work great. All of them have been on gas for the past two years however.0 -
Power Flame Service
Can you recommend someone in Queens or Brooklyn who knows how to service one of these burners.
thanks
sil0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements