Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
3/4 multicore for radiant loops
animatt
Member Posts: 14
can allied 3/4 muliticore pipe be used for radiant circuit/ loops in conjunction with al. plates?
0
Comments
-
3/4 PAP
3/4 PexAlPex is best used for distribution piping or a very large commercial radiant slab. The bending radius and stiffness would make it very difficult to work with overhead. Like a Boa constrictor.. Most contractors use 3/8" Pex with transfer plates on a staple-up application. Why fight the application with material that doesn't want to? Also, where would you find 3/4" plates?0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 927 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements