Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Myson Radiators - are they any good?
G Bell
Member Posts: 7
Last year we replaced our old 1950's oil boiler with a new TriangleTube gas condensing boiler. The boiler essentially just hooked up to our existing hydronic heating delivery system. We wish to start replacing the old radiators with newer contemporary styles. I quite like the look of the Myson<strong> </strong>T-6IVC or their decor style radiators. I have attached a photo of what our current radiators look like, which is essentially a finned design in a metal cage Throughout the house, all radiators are the same style although some are bigger and some are smaller, depending on the room that it is in. Our hydronic heating delivery and return appear to be inch and a half cast iron pipe and the leads going to the radiators appear to be 1 inch cast iron pipe. The entire heating system is controlled by one thermostat located in the upstairs hallway. The house has two floors, with a total of about twelve radiators.
I would be interested if the Myson radiators are of good quality and if any of their radiators would work well with replacing what we currently have. We wouldn't be able to replace all the radiators at once. Maybe about three or four per year, so whatever radiators we get would need to work well in conjunction with the system that is already in place.
I appreciate any feedback
Thanks,
GBell<span></span>
I would be interested if the Myson radiators are of good quality and if any of their radiators would work well with replacing what we currently have. We wouldn't be able to replace all the radiators at once. Maybe about three or four per year, so whatever radiators we get would need to work well in conjunction with the system that is already in place.
I appreciate any feedback
Thanks,
GBell<span></span>
0
Comments
-
Wall Panel Radiators
I prefer either the DiaNorm, Buderus or Runtal radiators. If Myson is easier for your distributor, so be it. The radiators have particular piping connections, requiring a repipe for each replacement. The radiators are also cofigured with a Thermostatic Radiator Valve (TRV) which allows control of each rad.0 -
Paul
Nice pic, have you had a chance to get a look at the new boiler? The word is not until Jan for you guys on the west coast. I'm sure you'll love the 35% drop bring it right in line with everyone else but yet offering much more than everyone else.There was an error rendering this rich post.
0 -
New Vitos
I'm meeting with the Viessmann folks next week. We'll see what they have to say.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements