Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
well pumps

robert smyth
Member Posts: 7
My friend has a well in his yard , well it,s really a 2.5 inch hole where father had a hand pump to a spring in his back yard in corona queens . Some years ago the pump broke ,he say's it's over 33ft down , so I need a multi stage hand or electric pump right? Need help to get the water flowing again ,Thanks Bobby
0
Comments
-
it calls for a deep set hand pump Not sure where you are located. electric pumps need a 4 inch hole most of the time for deep set applications. It may have also used a rod pump. Like the ones they use with the windmills. Dean Bennet supplies these things out in the west. I am sure they can ship.Cost is what you spend , value is what you get.
cell # 413-841-6726
https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 975 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements