Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Heat gain

don_185
don_185 Member Posts: 312
in A-C, Heat Pumps & Refrigeration
Most heatgain software pays for itself in no time at all.

Buy the software you ................just messing with ya.

Comments

  • Paul Fredricks_9
    Paul Fredricks_9 Member Posts: 315
    Heat gain calcs

    Anyone know of a free heat gain calc program on line? I know the Wall has heat loss for heating, but need to figure out an A/C load for a small apartment.
  • Brad White_193
    Brad White_193 Member Posts: 11
    Free? No

    but if you can e-mail me the particulars, I can run it for you on CHVAC or HAP if you like. All wall and glass areas by exposure to the nearest 16th (WSW, ESE etc. included), any internal lighting and power. Fixture counts are best.

    Let me know?

    See you at the WMBU tomorrow?
  • Jack Hinz
    Jack Hinz Member Posts: 7
    Load Software

    There use to be one at


    http://www.toww.net/products.htm
  • Paul Fredricks_3
    Paul Fredricks_3 Member Posts: 1,557


    I actually found a software program at the office. Just had to ask the sales guys. Brad, I think my computations will be close enough for government work. Thanks.
  • Mitch_4
    Mitch_4 Member Posts: 955
    go to

    www.heatload.com

    Not a bad free online..register as a student the first time..looks like it is sponsored by Thermopride as that is the only furnace they list.

    I have used it a couple times and compared it to my own long handed calcs, it is within spittin distance. a tad larger.
This discussion has been closed.

Categories