NTI triton boilers

Options
bart_6
bart_6 Posts: 1
in THE MAIN WALL
What has been your experience with these boilers; also we have had problems with the Munchkin 199 boilers. Have any of you, and if so what kind of problems? Thanks

Comments

  • Greg Swob
    Greg Swob Posts: 167
    so far

    100% success with NTI, but we haven't had them in for enough seasons yet to really tell. The Munchies, same thing- not enough time to test, but we've had good luck from the start up on. What has been your problem(s) with the Munchkins, we've only put in 140's & 199 ASME models, but no 80's so far?
  • rich pickering
    rich pickering Posts: 276
    software

    Make sure you have the latest control. That and everchanging instruction manuals.
  • Dave Stroman
    Dave Stroman Posts: 766


    Other than a very early model, I have had very good results. If you get the new TI series, it has all the updated controls and design improvements.

    Dave in Denver

    There was an error rendering this rich post.

  • Geo_5
    Geo_5 Posts: 69
    triniry

    everchanging instruction manual is right,yesterday you could vent the 150 with 2",today I'm online and it's 3" only now.
This discussion has been closed.

Categories