Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

round hydronic unit heaters

Options
Bernie Riddle_2
Bernie Riddle_2 Member Posts: 178
in THE MAIN WALL
Airhterm, Beacon Morris, Modine.....com's

Comments

  • Bob Frazier
    Bob Frazier Member Posts: 4
    vertical hydronic unit heaters

    have any of you ever seen a round shaped vertical throw hydronic unit heater. They are used in a loading dock area. I have no tags on the units and the owner wanted to see about parts and besides I am curious about these.

  • Ken_40
    Ken_40 Member Posts: 1,310
    Very common

    Trane, Carrier, Reznor all make 'em.

    Get out the digital camera and post a few pics. We'll figure it out with you.
  • ttekushan_3
    ttekushan_3 Member Posts: 964
    what everyone else said and

    if you're trying to look them up look under "hydronic projection heater." Sometimes this gets you right to what you're looking for.

    Terry T

    steam; proportioned minitube; trapless; jet pump return; vac vent. New Yorker CGS30C

  • Weezbo
    Weezbo Member Posts: 6,231
    Trane, Young and Modine make these in two *

    and i think i installed a bunch in the 70's

    maybe that might help.
This discussion has been closed.

Categories