Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Trinity
Options
ALH_4
Member Posts: 1,790
I'm looking for opinions on the NTI Trinity Ti400. Has anyone here used these in a multiple boiler application?
Thanks
-Andrew
Thanks
-Andrew
0
Comments
-
I did not know that the 400s were even available yet.
Dave Stroman
There was an error rendering this rich post.
0 -
Info
Any info on when they will be available?
-Andrew0 -
now
I hung one two weeks ago. Have not fired it yet.0 -
My main concern would be from a control standpoint. If you want to take advatange of all that turndown you need to be able to run em in sequential mode. Can the NTI take a remote modulation signal? The NTI150 I just installed can't.0
This discussion has been closed.
Categories
- All Categories
- 87.5K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 429 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 118 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 15.9K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 50 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements