Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
L4081
Empire_2
Member Posts: 2,340
If it's the one with the plastic little blocks with the temp dials,..Then yes I have notice it to. I thought it was me, but then again most controls will fall somewhat out of calibration.
Mike T.
Mike T.
0
Comments
-
L4081
Is it me or has anyone else notice the L4081 dual aquastats seem to be dying or over riding with age ?0 -
L4081
Got heat conductive compound ?0
This discussion has been closed.
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 114 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 110 Geothermal
- 161 Indoor-Air Quality
- 3.6K Oil Heating
- 71 Pipe Deterioration
- 999 Plumbing
- 6.3K Radiant Heating
- 392 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 46 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements