Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

PVC Chimney Vent Install

Options
Heatmeister_2
Heatmeister_2 Member Posts: 88
in THE MAIN WALL
What a bear today. My chimney had a 22 degree angle at the bottom 6 feet. In total we had to get on top of the roof hoist up a 27 foot piece of PVC then support with the metal bracket.

We allowed for six feet to hang inside the chimney with a heating blanket for ten minutes while supporting the othe 21 feet straight up. After ten minutes we quickly took the heating blanket off and slid the entire 27 foot pipe down the chimney so that the pipe could make the bend while still warm. It worked nicely but we need 3 people to pull it off.

Comments

  • Dave Stroman
    Dave Stroman Member Posts: 765


    Boy! Do you have a photo of that?

    Dave in Denver

    There was an error rendering this rich post.

This discussion has been closed.

Categories