Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

duct work for a pellet stove

Options
Kristy
Kristy Member Posts: 1
in THE MAIN WALL
I am looking for advise on how to adapt a duct work system so I can use a pellet stove ( similar to wood burning) to heat my 1500 sq home. HELP

Comments

  • marvin
    marvin Member Posts: 1


    Have you tried asking at Thesheetmetalshop.com
  • JackFre
    JackFre Member Posts: 225
    I did this for my Dad

    oh, about 30 yrs ago. I built a wood fired boiler for him and put it on constant circ and we put a large, as in large, sheet metal hood over the unit with a single duct riser into the hallway of the house. A couple smaller returns at the far ends of the place and we had very even heat out of the system...once he learned its peculiarities.
This discussion has been closed.

Categories