Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wirsbo MultiPress help needed

John Barba_2
John Barba_2 Member Posts: 92
in THE MAIN WALL
can be purchased through your local Uponnor wholesaler.

Comments

  • Seattle Nick
    Seattle Nick Member Posts: 64


    Is there a press head that will fit in my cordless ProPress tool that will press MultiCor 3/4" fittings? Otherwise, is there a manual tool that will work with 3/4" MultiCor?

    Thanks for the Help!

    Nick
  • singh
    singh Member Posts: 866
    yes

    I think the 3/4" multicor press head can fit into the propress.
    I have the cordless REMS tool and the head I ordered from Uponor fits
    into it. I think the head fits into both propress and rems.
    Call uponor to make sure.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • John Barba_2
    John Barba_2 Member Posts: 92
    Multipress/Propress

    Our MultiPress heads will fit the LARGER Rigid ProPress tool, not the smaller one that only goes up to 1". We tried this at the factory a few months ago with the local Rigid rep. Our heads fit their larger tool, their large heads fit our tool.
  • jim lockard
    jim lockard Member Posts: 1,059
    multipress- John Barba.

    John B. The Rigid CT-400 tool will accept Upnor multipress heads? I can order these thru my Upnor Rep or factory direct? Thanks J.Lockard
  • Seattle Nick
    Seattle Nick Member Posts: 64


    Great! Thanks Singh and John, that's a big help. I have been using the 320-e and the ct-400 propress so it looks like I will be set as long as the jaws are in stock somewhere.

    Nick
This discussion has been closed.

Categories