Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wirsbo MultiPress help needed

John Barba_2
John Barba_2 Member Posts: 92
in THE MAIN WALL
can be purchased through your local Uponnor wholesaler.

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Seattle Nick
    Seattle Nick Member Posts: 64


    Is there a press head that will fit in my cordless ProPress tool that will press MultiCor 3/4" fittings? Otherwise, is there a manual tool that will work with 3/4" MultiCor?

    Thanks for the Help!

    Nick
  • singh
    singh Member Posts: 866
    yes

    I think the 3/4" multicor press head can fit into the propress.
    I have the cordless REMS tool and the head I ordered from Uponor fits
    into it. I think the head fits into both propress and rems.
    Call uponor to make sure.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • John Barba_2
    John Barba_2 Member Posts: 92
    Multipress/Propress

    Our MultiPress heads will fit the LARGER Rigid ProPress tool, not the smaller one that only goes up to 1". We tried this at the factory a few months ago with the local Rigid rep. Our heads fit their larger tool, their large heads fit our tool.
  • jim lockard
    jim lockard Member Posts: 1,059
    multipress- John Barba.

    John B. The Rigid CT-400 tool will accept Upnor multipress heads? I can order these thru my Upnor Rep or factory direct? Thanks J.Lockard
  • Seattle Nick
    Seattle Nick Member Posts: 64


    Great! Thanks Singh and John, that's a big help. I have been using the 320-e and the ct-400 propress so it looks like I will be set as long as the jaws are in stock somewhere.

    Nick
This discussion has been closed.

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories