Welcome! Here are the website rules, as well as some tips for using this forum. 
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website.  Thanks!
What I'd like to see.
 
            
                
                    Alan(CaliforniaRadiant)Forbes                
                
                    Member Posts: 1,243                
            
                        
            
                    We always install a ball valve on the outlet side of a differential bypass to prevent short-circuiting when we purge; I know I'm not the only guy that does that.  I'd like to see an integral shutoff valve to simplify installation.  In a green color perhaps.
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=53&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
                <A HREF="http://www.heatinghelp.com/getListed.cfm?id=53&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0                
            Comments
- 
            Green is Good . I like Green*~/:)
 good thought! 0 0
This discussion has been closed.
            Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 112 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements
