Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

mono-flo question

Options
PLUMBERSMITTY
PLUMBERSMITTY Member Posts: 1
in THE MAIN WALL
THE BTU LOAD AND THE HEAD LOSS WILL GIVE THE ANSWER? THE AMOUNT OF AREA THE HEAT HAS TO TRAVEL IN A LOOP ,EVEN SMALL RAD. LOOPS IS A MATH FORMULA WE ALL THOUGHT THISWAS USELESS HAHA

Comments

  • steve_91
    steve_91 Member Posts: 1
    mono-flo question

    does anyone know how long from a 1x1/2 inch or a 3/4x1/2 inch mono-flo tee the maximum lenth of the branch to a radiant radiator.my main is in the basement and i would like to hit the radiators on the 2nd floor. the average zone 12000 btus with 3 or4 radiators per zone any info would be appreciated
This discussion has been closed.

Categories