Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Radiator venting speeds
Options
michael_15
Member Posts: 231
Is there published/known data that compares the relative venting speeds (at some given low pressure) for different radiator vents? For example, I know that the Gorton 4/5/6/C/D are 1x/4x/8x/15x/27x with respect to each other, but how does this compare, for example, to the settings (1-6) on a Hoffman #1A? What about the adjustable Ventrite models that I've so often seen on radiators (I believe the dial goes from 1-8 or something)?
What about main vents for, say, Gorton vs. Hoffman?
-Michael
What about main vents for, say, Gorton vs. Hoffman?
-Michael
0
Comments
-
There's a chart
in the workbook to Dan's "Dead Men's Steam School" video, which also contains charts showing the air volumes in pipes and radiators. This is available on the Books and More page of this site.
One of our steam enthusiasts has set up a lab and is working on updating the vent chart. Stay tuned.......
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements