Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Main steam vent sizing question
Options
Eric_8
Member Posts: 66
Would appreciate your input on which main vents I should use (Gorton #2s? how many?) based on the following:
1st main is about 170 feet with 3 elbows, and
2nd main is about 125 feet with 2 elbows
The mains are 4.5 inches in diameter.
Currently, we have one Hoffman 75 at the end of each main, and I suspect that is quite insufficient. Thanks!
DL
1st main is about 170 feet with 3 elbows, and
2nd main is about 125 feet with 2 elbows
The mains are 4.5 inches in diameter.
Currently, we have one Hoffman 75 at the end of each main, and I suspect that is quite insufficient. Thanks!
DL
0
Comments
-
You're right
those Hoffmans are pathetically small for that system. Vent the long main with four Gorton #2 vents, and the shorter one with three. You won't believe the difference.
www.gorton-valves.com
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"Baltimore, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 87.7K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 129 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 122 Geothermal
- 170 Indoor-Air Quality
- 3.8K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.6K Radiant Heating
- 396 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 17 Recall Announcements