Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
6,300Mbtu MODULAR STEAM
Options
David Van Wickler_3
Member Posts: 63
Just finished designing a 6.3 million BtuH steam system and I don't know what type of check valve to specify. Any ideas?
0
Comments
-
Why would you want to
install a check on the supply with a dropped and dripped main?
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
check valve
provides pressure isolation. Each boilers water line is only effected by it's own steam pressure. If it's off, the pressure is zero and it's water line is uneffected.
Just seems the best way to provide modular boilers with there own job.
- DVW0 -
The man you need to talk to
is our friend Noel Murdough at Slant/Fin. I don't know anyone who knows this type of system as well as he does. E-mail him at nmurdough@slantfin.com and tell him I sent you.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements