Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
New oil fired radiant install.
Options
S Davis
Member Posts: 491
Our latest oil fired radiant.
This job sits at 2000' overlooking the San Jaun islands in washington state.
S Davis
This job sits at 2000' overlooking the San Jaun islands in washington state.
S Davis
0
Comments
-
Nice. How come no check valve on the injection loop? Does that one foot drop work as well?0 -
if I had to guess ...
thats a flo check circulator....Is that a RPZ back flow preventer? a big step up from a 9D...$$$$...kpc
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Contractor"0 -
009
Yes it is the 9D will not meet code around here, although alot of people are still using them, I don't think some of the inspectors know the difference.
You would think with the liability issues involved more people would use the 009.
S Davis0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements