Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
90 degree union stop for towel warmers
Options
Kritz_3
Member Posts: 85
I remember a post for union stops for towel warmers that were
chrome plated. I was looking for a manufacturers or retailers website. Any help would be appreciated.
Thanks, Kritz
chrome plated. I was looking for a manufacturers or retailers website. Any help would be appreciated.
Thanks, Kritz
0
Comments
-
radiator valves
I have these on my panel rads. Is this what you are looking for?
http://www.veha.com/pricing.html0 -
Oventrop
makes all sizes and models, including white trim. try Chris Rorke at Blueline Supply, Jackson Hole, WY. He ships promptly and is well versed in all matters of piping, boilers and eurotrim.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Contractor"0 -
Valves
go to heatlines.com & look @ the Oventrop info. I like part # 1163452 (Chrome Left hand) on the right hand the "Combi E" part #1166052 (Bal. & shut off valve)...
You will decide what you like. Greg0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements