Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Staging Hydro-Unit Heaters
Options
Climate Creator
Member Posts: 103
Anyone have any ideas on staging hydronic unit heaters so they don't all run at once? I will be putting them in a garage 3 bays - 3 heaters. I would like to save the guy some money by not having them ALL ALWAYS run. I have some ideas, but theres always room for more!!
Thanks in advance,
Rich
Thanks in advance,
Rich
0
Comments
-
controller
Look for a local distributor for commercial controls.
We installed three steam coils in a PowerYoga studio recently and put all three on one stageing control I think it was from Honeywell with a remote sensor,It works great and simple...
Steve0 -
Staging Hydro-Unit Heaters
Honeywell you say? Ok thanks, I will look into it. You would think there was a lot more controls out there for this kind of thing.
Thanks,
Rich0 -
Control
Honeywell T775A1027 is the 3-stage control.
4-stage control is a 1035..
hope this helps and good controlling to ya.
steve0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements