Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
drop header club part2
Options
Dave Palmer_3
Member Posts: 388
abatement guys finally showed up Wednsday,so we could work Thursday and Friday.Drop header worked sweet,everything when into place as planned. Had 5 returns to repipe and add vents in the right places.Had heat to the second floor in 20 minutes from a cold start.I'll go back next week and skim it and clean off the pipe dope.We also washed all the cuts with vinegar to help with smells when 1st steaming,seemed to work.Hope to cut the oil bill in half.Happy piping,Dave
0
Comments
-
Nice job, Dave
Don't make any predictions about fuel savings...let it be a pleasant surprise. MD0 -
Nice job, Dave
Don't make any predictions about fuel savings...let it be a pleasant surprise. MD0 -
good for them....
bad for me,I supply the fuel;{0 -
one more view
0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements