Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burner specs??
Options
Richard D._2
Member Posts: 156
Thanks again and the ?is..Does any1 know where I can get spec sheets on Carlin burners,99 thru 701??I want the set upspecs for air.nozzle and electroids..Prefer all together.....Plus other brands would be a plus..we have 3 new trainees and want to supply as much as I can....This site has been told to them!!!!One trainee is 17 ,PASSED his journeymans and need the hours!!!Cool for 17,we are impressed by this kid!!I did e mail Carlin but who knows,,,!Thankyou all again Richard D.
0
Comments
-
Try going over to
www.oiltechtalk.com for specs on oil.
I have manuals on Carlin Gas Conversion burners if you need them.
You can also try George Lanthier at www.firedragonent@comcast.net0 -
0
-
Thanks
Tim and Alan I just printed your specs and will be making several copies...They will be a great help..Richard0 -
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements