Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
looking for bypass zone-valve
Options
paul lessard_2
Member Posts: 192
═════╦══════════════╦═══1¼═══Ω
1¼ 1¼
╠══════════════╩
1¼ 1¼
╠══════════════╩
0
Comments
-
How big do you need?
Paul if you go to www.invensysIBS.com we have Erie 3-way zone valves to 1 1/4" but in the actuated valves we go to 6". There is a variety of valve styles and ways to actuate them, on/off or modulating. Take a look and if you have a question I would be happy to answer it.0 -
thanks art..long live the wall!!
just got my hydronics design studio thanks siggy!0 -
Check this out...
Try www.sparco-inc.com, and you should find what you're looking for there.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements