Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
one pipe banging
jstaby
Member Posts: 1
installed new boiler near pipeing is right.thebanging is at startup. it was skimmed 8 times .all air vents changed
no insltion on pipes .200.000 btu of rads.300.000 boiler
returns flushed . water level is lowwer than the old one. andthe steam start going the level goesbelow site glass and it looks like i got presure from the top . i got 2 in black to 3in manafold 11/2 equizer and loop
no insltion on pipes .200.000 btu of rads.300.000 boiler
returns flushed . water level is lowwer than the old one. andthe steam start going the level goesbelow site glass and it looks like i got presure from the top . i got 2 in black to 3in manafold 11/2 equizer and loop
0
Comments
-
too much fire
sounds like the boiler is a little big.
Noel0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 426 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 161 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 994 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements