Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
one pipe banging
jstaby
Member Posts: 1
installed new boiler near pipeing is right.thebanging is at startup. it was skimmed 8 times .all air vents changed
no insltion on pipes .200.000 btu of rads.300.000 boiler
returns flushed . water level is lowwer than the old one. andthe steam start going the level goesbelow site glass and it looks like i got presure from the top . i got 2 in black to 3in manafold 11/2 equizer and loop
no insltion on pipes .200.000 btu of rads.300.000 boiler
returns flushed . water level is lowwer than the old one. andthe steam start going the level goesbelow site glass and it looks like i got presure from the top . i got 2 in black to 3in manafold 11/2 equizer and loop
0
Comments
-
too much fire
sounds like the boiler is a little big.
Noel0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements