Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Circuit length
Options
rosco
Member Posts: 8
Just curious - what rule of thumb do you use for maximum circuit length when doing staple up with heat transfer plates for both 3/8 and 1/2 tubing?
0
Comments
-
RPA Standard Guidlines
Rosco,
According to the RPA guidlines
1/4": 100-125'
3/8": 200-250'
1/2": 250-350'
5/8": 400-500'
3/4": 500-600
1": 750'
Hope this is what you were looking for.
Ant
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements