The circle of heat hr

Cosmo · September 2002

we think, everytime I see something I always try to figure how it was done. Thanks for bringing back to earth....
Cosmo

hr · September 2002

unbroken

My primary loop with V/S injection from a wood boiler/ buffer. Back up MZ power. PAB by Wirsbo, Weil, and Kitec.

hot rod

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

keith · September 2002

Help me out

What is the equipment in the top dead center of your loop?

Steamhead · September 2002

HR, That's

beautiful! And I know it works as well as it looks.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

hr · September 2002

TDC

is a Sparco air purger with a unistrut band around it to fasten it to the wall. The 1/2 Weil pex goes down to the floor mount expansion tank.

hot rod

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Steve Ebels · September 2002

Too much........

Time on your hands Hot Rod. Too much time. I wonder if you have a job or your hobby is artistic hydronics instead of bird watching like Dan's.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Cosmo · September 2002

How

How did you get the primary pipe circle perfect? Only thing I can think of is you may have cut a circular piece of plywood to use as a jig to bend k-copper around....
It is beautiful man....
keep it up,
Cosmo

hr · September 2002

A really cheap trick!

It is just 1 loop off a coil of 1-1/4" K copper coil

I customizied some angle pump flanges using the new Blockade solder from JW Harris.
hot rod

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

The circle of heat hr

Welcome

Comments

Welcome

Quick Links

Categories