Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Hard to find steam radiator size
Doug Badger
Member Posts: 2
I work for R.E. Michel's, and have a contractor looking for a steam radiator that is no more than 16" high and 24" wide. Burnham sent me here to see if anyone out there knows of a source for this item. Thanks, Doug
0
Comments
-
steam radiators
Try Shafter Bros 1 800 361 1778 They have a lot of that stuff Canadian Dollars as well
Good luck Lawrie Any problems Call 780 447 22320 -
Doug, how many
btus/hour are needed in this room, and where is this project located?
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
I talked with the contractor working on this. He needs three radiators that fit this size. He says BTU's are not that big of a concern - this is for a remodeled kitchen. I appreciate the help, guys.
Thanks, Doug0
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 425 Carbon Monoxide Awareness
- 108 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 959 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements