Insight Plus QR code - looking for one decoded sample
Options
lel123
Posts: 1
Hello all, I am building a tuning app for heating contractors and I want to add a feature that reads the Bacharach Fyrite Insight Plus QR code straight into the app. The payload format is not published anywhere. If anyone here owns an Insight Plus (or InTech) and is willing to help, what I need is simple: take a photo of the analyzer display showing a reading, scan the QR code on that same screen with any generic QR reader app (not the Bacharach app), and paste the decoded text here together with the numbers on the display (O2, CO, stack temp, efficiency, draft, fuel, date and time). With that pair I can work out the field layout and build a correct parser. Thank you, Lens.
0
Comments
-
Check your messages
0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 135 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.2K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 52 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements