Peerless Gas Boiler 211A

Options
Jalen_Jalen2006
Jalen_Jalen2006 Posts: 79
in THE MAIN WALL
IMG_5041.jpeg IMG_5040.jpeg IMG_5039.jpeg

I am just not feeling comfortable with this, I referred to the manual and there’s only this gasket apparently but there’s so much surface without a gasket. Also someone snapped off one of the studs for tightening down the clean out I feel like I need to add more rope and even high temp silicone the hole with broken stud. Let me know your opinions

Comments

  • 109A_5
    109A_5 Posts: 4,759
    edited October 12

    The lack of gasket at the bottom may be by design. I'd repair the broken stud or come up with a reasonable way of securing the cover.

    image.png
    National - U.S. Gas Boiler 45+ Years Old
    Steam 300 SQ. FT. - EDR 347
    One Pipe System
    Big Ed_4Jalen_Jalen2006

Categories