Actuator Help
Hello there. I'm struggling with replacing an actuator. While replacing it, I'm now trying to figure out if the valve is a mixing valve or a diverter valve. Attached are pics. Can anyone help me determine if it's a mixing valve or a diverter valve, and recommend a replacement actuator? Thank you so much.
Comments
-
It is a 4 way mix valve for low temperature heaters. Do you have radiant heat in the home?
InFloor private labeled that valve, I believe it is a tekmar brand, # 722 so you have other actuator options.
Check both the actuator and that tekmar control to be sure which has a problem.
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Yes, I have radiant floor heating, and the actuator hasn't moved in a year. How do I test to see if the actuator has the problem, or if it's the control? here's a closeup of the control
0 -
I should add that the valve moves freely when I put the actuator into manual model.
0 -
you need a meter to first check power to the tekmar control, then output from the control
Tekmer website probably has a manual with troubleshooting procedures on the control
That control is 25 years old, probably the actuator also
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 114 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 111 Geothermal
- 163 Indoor-Air Quality
- 3.7K Oil Heating
- 72 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 49 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements