Tool Restoration
Comments
-
The best ones are at the end of the video.
0 -
I tried, but it says "This video is unavailable"
Dennis Pataki. Former Service Manager and Heating Pump Product Manager for Nash Engineering Company. Phone: 1-888 853 9963
Website: www.nashjenningspumps.com
The first step in solving any problem is TO IDENTIFY THE PROBLEM.
2 -
my forearm hurts just looking at that picture of that steel shaft hammer.
0 -
I was able to watch it. Nice work they do. Two observations: They wind up with a lot of shiny steel… how to keep it from rusting? And it seems they didn't sharpen the teeth of the pipe wrench. Otherwise, some very nice work. The nippers were a nice save. 🤠
Yours, Larry
0 -
The pipe wrench teeth were in good shape so they didn't need sharpening. He is retired and does this for fun.
He likes to take rusty screwed up tools and fix them up. I just sent him some stuff to keep as I clean things out and get rid of stuff. You can't sell used tools around here they go for peanuts.
Depending on the tool he either sprays with shellac or protects them with oil or paste wax
@Pumpguy don't know why the link doesn't work but if you search you tube for "Scoutcrafter 8 tools restored 8 tools back in service" it should come up.
1 -
Selecting quote on Ed’s original post reveals the url which got me past the blocker.
1 -
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 425 Carbon Monoxide Awareness
- 108 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 963 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements