Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

bathroom exhaust fan in plaster ceiling

dkmn
dkmn Member Posts: 2

Hello, I need to install a bathroom exhaust fan in a 1959 house with ceiling cable heat and plaster walls,ceiling.Planned on using existing wiring and switch where light is. Can i cut into the plaster ceiling to fit housing of exhaust fan without damaging cable heat?

Comments

  • PC7060
    PC7060 Member Posts: 1,622

    you will need to locate the heating cable runs. Recommend using an infrared sensor; you can buy units that attach to smart phone.

    GrallertLong Beach Ed
  • dkmn
    dkmn Member Posts: 2

    Thanks

  • mattmia2
    mattmia2 Member Posts: 12,492

    Chip the plaster away carefully with a hammer and screwdriver, if you do it in little chunks you should be able to find the resistance wire before you damage it.

    Test the plaster for asbestos first since a lot of premixed plaster products from that era had asbestos in them.