American Radiator identification
Looking for some help on identifying which model of American Radiator I have in my house.
Comments
-
0
-
Thank you! Now I can calculate square footage of my radiators to see if my boiler is sized properly
1 -
Measure and compare but i think that is the right series.
0 -
Comparing by looks I also have Dan's radiator book looking through that those are definitely what I have.
0 -
Yes, it's a Corto. But there were a couple variations of the Corto. Measure the distance from the center of one section to the center of the next section. If it's 2-1/2", use the standard chart. If it's 3", use the Hospital Corto chart. But if it's 2", go here:
3 -
They are standard Corto. I was able to do my calculations and based upon the square footage and the output of my boiler it looks like the installer knew what he was doing when he sized it.
1 -
Rating tag on the boiler
0
Categories
- All Categories
- 87.8K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements