Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

viessmann 222 combi

Bill_44
Bill_44 Member Posts: 4
in Gas Heating

Getting an F3 (Combusion control) fault; resets @ "R". changed ionization & igniter. What else to check?

Comments

  • psb75
    psb75 Member Posts: 1,070

    Clean the heat exchanger. Check the condensate trap. Basic yearly maintenance.

  • GGross
    GGross Member Posts: 1,654

    F3 is a weird fault, flame is already detected at burner start, you need to check the flame sensor and cable. I would contact tech support for that one.

  • Derheatmeister
    Derheatmeister Member Posts: 1,660

    Static Gas pressure..Running Gas Pressure.Basic maintenace such as cleaning both rods.Make sure the polarity is correct including propper ground !

Categories