Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Flame Loss While Running
Options
Clintt_R1
Member Posts: 1
I have an SBN 1000
Continually getting Flame Loss While Running on lower heat exchanger only.
Been cleaned and practically rebuilt.
New gas valve, New blower, New igniter,New Flame sensor. Checked all grounds and gas pressures ?
I'm baffled ?
Thanks
Continually getting Flame Loss While Running on lower heat exchanger only.
Been cleaned and practically rebuilt.
New gas valve, New blower, New igniter,New Flame sensor. Checked all grounds and gas pressures ?
I'm baffled ?
Thanks
0
Comments
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 426 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 990 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements