Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
What is this radiator?
saias
Member Posts: 20
Looking to identify a radiator and its rating so I can calculate its EDR? Thanks in advance.
0
Comments
-
That's a cast-iron convector. I'm pretty sure it's an American-Standard.
To find the EDR, measure the height, width and depth, then look it up in the proper chart. There's one here on eBay:
https://www.ebay.com/itm/385628350515
Or you could get @DanHolohan 's book, "E.D.R." which has an almost dizzying number of radiator charts.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
Amazing. Sure looks like the Arco Convector. Full catalog and spec - https://heatinghelp.com/assets/documents/American-Radiators.pdf
If I'm reading correctly, I have the 525 with 26" enclosure height which has 23.2 EDR.
1
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 117 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 111 Geothermal
- 163 Indoor-Air Quality
- 3.7K Oil Heating
- 72 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements