Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Weil McLain WM97+110 Gas-fired water boiler not thoroughly heating

CONFUZED
CONFUZED Member Posts: 5
in Radiant Heating
Hot water wont circulate completely around my baseboard. The pipes are only hot for about 20 to 30 feet past the Area Control Valves.
skibbereen_

Comments

  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,644
    Post pictures! 

    Air bound, check valve stuck, new install? 
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
  • CONFUZED
    CONFUZED Member Posts: 5
    Solid_Fuel_Man said:

    Post pictures! 

    Air bound, check valve stuck, new install? 

    I bled the lines at the beginning of the season when I got a check valve error and the fan kicks on once every min for about 30 seconds.
  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 10,426
    edited November 2023
    CONFUZED said:

    Solid_Fuel_Man said:

    Post pictures! 

    Air bound, check valve stuck, new install? 

    I bled the lines at the beginning of the season when I got a check valve error and the fan kicks on once every min for about 30 seconds.
    Are you talking about the FAN in the WM boiler or another FAN in an air handler or something?


    The Combustion FAN in the WM boiler operating for only "30 seconds" sounds like a call for heat is interrupted before the system gets to ignite and complete the start up cycle.


    More details are necessary to understand the actual issue.

    You can post a video by sharing a youtube link or a facebook link

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

    Solid_Fuel_Man
  • CONFUZED
    CONFUZED Member Posts: 5

  • CONFUZED
    CONFUZED Member Posts: 5
    EdTheHeaterMan said:

    CONFUZED said:

    Solid_Fuel_Man said:

    Post pictures! 

    Air bound, check valve stuck, new install? 

    I bled the lines at the beginning of the season when I got a check valve error and the fan kicks on once every min for about 30 seconds.
    Are you talking about the FAN in the WM boiler or another FAN in an air handler or something?


    The Combustion FAN in the WM boiler operating for only "30 seconds" sounds like a call for heat is interrupted before the system gets to ignite and complete the start up cycle.


    More details are necessary to understand the actual issue.

    You can post a video by sharing a youtube link or a facebook link

    I ment to say Blower(#3 on the diagram) instead of fan.
  • CONFUZED
    CONFUZED Member Posts: 5
    https://www.youtube.com/watch?v=dgcdbxcvHQY
  • HVACNUT
    HVACNUT Member Posts: 6,755
    Show the boiler and system piping. 
    How many zones?
    Indirect water heater?
  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,644
    That is the worst sounding blower I've heard in awhile. 

    Sounds like it's doing a prepurge, then trying to light burner....failing...then doing post purge. 

    Does it light? Is there gas to the appliance?
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!

Categories