Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wet rotor circ pump question

CBRob
CBRob Member Posts: 283
edited November 2023 in THE MAIN WALL

This pump position is not acceptable is it?
Don't the shafts have to be horizontal?

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • CBRob
    CBRob Member Posts: 283

  • hot_rod
    hot_rod Member Posts: 25,204
    According to the manufacturer, shown in the installation manual.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Intplm.
    Intplm. Member Posts: 2,657
    Usually, the circulator manufacturers want the motor to be installed in the horizontal position.
    But there could be an exception.
    As @hot_rod says above. Check the directions in the installation manual.
  • CBRob
    CBRob Member Posts: 283

    Looks like grundfoes says no....
    Intplm.

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories